Digilube Conveyor Lubrication Equipment
I-beam chain conveyor lubrication system, conveyor brushes / cleaners, system controller, lubrication tanks, monorail I-beam lubricator, and enclosed track lubricators are all listed below. Click here for dry film lubricants. Please click on any of the below images to view/print their product data sheets.
Conveyor Lubricators, Tanks, Brushes, Controllers
The monorail conveyor lubricator is usually located at the point of application. It consists of the DL5002 controller, and all the outputs i.e. 24vdc solenoid valves and sensors, dispensing tubes and bracketry. It lubricants x-chain pins & open trolleys on an I-beam conveyor. The DL5002 can control up to 4 different lube cycles with multiple lube points within each cycle. The conveyor lubricator is connected to a 1/4" nylon lubricant supply tubing, which is connected to a 6 or 65 gallon lubricant tank located on or next to a support column for easy of filling. The 6-gallon lubricant tank can also be installed on the rail next to the lubricator. The lubricator comes mounted on a 2-foot section of I-beam rail or can be field installed on existing rail.
The enclosed track lubricator is mounted at the point of application. A 15" long slot is cut out on top of the rail and the lubricator fits over the opening. It lubricates the vertical load wheels, horizontal guide rollers and pivot points. The lubricator is connected to a 1/4" nylon lubricant supply tubing, which is connected to a 6 or 65 gallon lubricant tank located on or next to a support column for easy of filling. The 6-gallon lubricant tank can also be installed on the rail next to the lubricator.
The lubricant tanks come in two sizes. The DL806 lubricant tank has a 6-gallon capacity and the DL865 lubricant tank a 65-gallon capacity. The 6-gallon lubricant tank usually is mounted waist high on a nearby support column but can be mounted directly on the conveyor rail next to the lubricator.
Monorail Conveyor Brush
The DL-60 Power Conveyor Brushes is designed to automatically clean monorail I-beam conveyors x-chain and trolley wheels and enclosed track conveyors vertical wheels, horizontal rollers & pivot points.
PDF Brochure ==> Installation and Start Up Guide For the Digilube DL-60
Power Chain and Trolley Cleaning System
Also see our Enclosed Track / I-Beam Brushes page.
The DL5002 is a unique microprocessor which controls all the functions of the conveyor lubrication system. This conveyor controller helps separate our equipment from the competition. It's easy to say, "our system is the most technically advanced".
Click on these hyperlinks to download the service manual for the Digilube Programmable Lubrication System. (You must have the free Acrobat Reader to view/print the manuals.)
Engineered System Lubrication
Engineered System Lubrication from Digilube is the industry's best alternative for achieving precise centralized lubrication performance, controlling costs, and maximizing maintenance efficiency. It is also a powerful tool in minimizing the downtimes of enterprise-critical equipment and can often reduce utility expenses.
Go To Product Page 1 2 3a 3b 4
Home | Conveyor Lubricators | Lubricants & Grease | Conveyor Brushes
Lube Tanks | Bearing Lubrication | Coalescers | Contact
digilube systems, inc.
216 East Mill Street; Springboro, Ohio 45066; USA
1-937-748-2209 or 1-800-837-5667 phone; 1-937-748-0597 fax
© 2011. All rights reserved. Digilube is a manufacturer of conveyor chain lubrication systems, lubricants & grease, and distributor of automatic bearing lubricators.
for high search engine rankings